Descriere

PM12 AC contactors for load currents from 10 to up 63 A (AC-3) are intended for actuating, shutting down and reversing of asynchronous electric motors equipped with a short-circuited rotor for the applied voltage limited to 660 V (AC-3 application category). They can be also used for remote control of lighting, heating circuits and various low-inductance loads (AC-1 application category). All unit types per load currents limited to up 40 A have a single group of auxiliary NO or NC contacts. Types per load currents exceeding 63 A have two contact groups (NO and NC).The PM12 contactor is a well-known brand in the market.
PM12 IEK - compliance of mounting dimensions, PM12 series.
The best performance among manufacturers PM12 performance - switching wear resistance is four times higher.Rated control supply voltage Us at AC 50HZ: 400
Rated control supply voltage Us at DC: -
Rated operation current Ie , 400 V: 63
Connection type auxiliary circuit: EV000415
Number of auxiliary contacts as normally closed contact: 0
Number of auxiliary contacts as normally open contact: 1
Nominal operating AC voltage Ue: 230, 400, 660
Rated insulation voltage Ui: 660
Rated surge voltage: 6
Conventional Short Circuit Current Inc: 3000
Overcurrent Protection - Fuse gG: 80
Tightening moment: 3,5
Control voltage ranges at actuation Uc: 0,85...1,1
Flexible cable without tip: 10...25
Control voltage ranges at release Uc: 0,3...0,6
Hard cable without tip: 16...35
Switching wear and tear during AC-3: 0,6
Mechanical wear resistance: 5.0
Ambient temperature: -40...+55
Width: 78.0
Height: 123.0
Weight: 1,25
Additional terminal - Nominal voltage Un AC: < 660
Additional terminal - Nominal voltage Un DC: < 440
Additional terminal - Nominal insulation voltage Ui: 660
Additional terminal - Thermal resistance current In: 10
Additional terminal - Minimum On Umin Capability: 24
Additional terminal - Minimum On Imin Capability: 10
Additional terminal - Overcurrent protection - pre-ocher gG: 10
Additional terminal - Max short-term load: 100
Additional terminal - Insulation resistance: > 10
Voltage type for actuating: EV000509
Number of auxiliary contacts as normally closed contact, delayed switching: 0
Number of auxiliary contacts as normally open contact, leading: 0
Number of auxiliary contacts as change-over contact: 0
Maximum switching frequency: 1200